#24041 O ring for N/R valve

#24043 Washer for the Porcelain Handle

#24055 Cylinder end plate seal

#24100 Angram Sparkler .6mm holes

#24352 Cover plate screw

#24101 Angram Sparkler 1mm holes

#24800 John Guest Push Fitting 1/2" stem - 3/8" straight. The one to use with 3/8" ID hose. An easy way to connect beer hose to the inlet valve of your Angram beer engine.

#24801 John Guest Push Fitting 1/2" stem - 1/2" elbow. The one to use with 1/2” ID hose. An easy way to connect beer hose to the inlet valve of your Angram beer engine.

#24058 Insulation Panel - set of 4, 1/2pt

#23630 Small Drip Tray

#24051 Ball and socket joint

#24026 Handle tie rod with nuts etc. CO

#24026 Handle tie rod with nuts etc. CC / CM

#24026 Handle tie rod with nuts etc. CQ

#24092 Small drip tray holder

#24090 For 1/2 pint engine, i.e. 'Connector hose, 1/4 pt. CQ'

#24087 For 1/4 pint engine, i.e. 'Connector hose 1/4pt. CO'

#24088 For 1/2 pint engine, i.e. 'Connector hose, 1/2 pt. CO'

#24090 'Connector hose, CM or CC'

#24093 Drip tray holder for CM engine

#23650 Large Drip Tray

#40087 Pump Clip
Easily change the beer information; label just slides in. Attaches to handpump with two screws which are included with instructions.

# 24231 - Rod End Bearing for CC or CM model engines

#24066 End Plates CO Engine (Pair)

#24067 End Plates CQ Engine (Pair)

#24068 End Plates CC or CM Engine (Pair)

#24049 Piston rod 1/2pt

#24050 Piston rod 1/4pt

#40080 Blackboard Pump Clip

#24490 Inlet Valve

#24212 Tubular handle adaptor CQ/CC/CM

#24085 Short nozzle, CO

#24047 Piston rod seal module

#24007 Black Handle

#24001 Top nut for oak handle

#24006 Top nut for porcelain handle

#24086 Swan neck nozzle CO 1/2 pint

#24084 Swan neck nozzle CO & CQ 1/4 pint

#24083 Swan neck nozzle CC

#24075 Swan neck nozzle CM

#24002 Long oak handle

#24011 Adaptor for porcelain handle

#24004 Tubular Handle

#24004C Tubular Handle
Photo NOT shown in chrome.

#24003 Top nut for tubular handle

#24003C Top nut for tubular handle in chrome

#24005 Tubular handle adaptor CO

#24080 Single plinth CO 1/2 pint and 1/4 pint

#24081 Single Plinth CQ

Replacement plinth for MB engine.

#24056 Piston & glass 1/2pt for non-water jacketed cylinder. For water jacketed cylinder, please call.

#24057 Piston & glass 1/4pt for non-water jacketed cylinder. For water jacketed cylinder, please call.

#24481 Complete Cylinder Assembly for CQ Engine with Water Jacket Reconditioned at the Angram Factory

#24482 Complete Cylinder Assembly 1/4 Pint Pull CQ Engine Water-Jacketed